Polyaromatic Hydrocarbons (PAHs): Structures, Synthesis and their Biological Profile.

Polycyclic aromatic hydrocarbons (PAHs) are aromatic compounds with two or more fused benzene rings in their structural configurations. PAHs do not contain heteroatoms and substituents on the ring system. PAHs containing up to four rings are called light PAHs while those that contain more than four rings are considered as heavy PAHs. Heavy PAHs are more stable and more toxic than the light PAHs. Generally, the increase in the size and angularity of a PAH molecule results in an increase in hydrophobicity and electrochemical stability. Ring linkage patterns in PAHs may occur in such a way that the tertiary carbon atoms are centers of two or three interlinked rings. The examples of PAHs are naphthalene, anthracene, phenanthrene, acenaphthylene, acenaphthene, fluorene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[b]fluoranthene, etc. PAHs can be produced either naturally or anthropogenically and have toxic properties. Due to the health risk posed by their exposure, there is a need to control the release of PAHs through air quality management. Refinery industries are required to monitor and regulate their discharges. There is an urgent need for the considerable efforts to be applied in the field of research to degrade and monitor potentially hazardous substances to control, predict and avoid negative effects of PAHs pollution.

Determination and analysis of harmful components in synthetic running tracks from Chinese primary and middle schools.

In China, incidences involving pupils suffering health problems caused by synthetic running tracks have attracted the public's attention. However, the existence of known and unknown harmful chemicals in the tracks have not yet been explored. Here, the levels of 16 known harmful ingredients were firstly analyzed in 167 school running tracks. In all samples, the recognized toxic solvents and additives, such as the benzene series, soluble mercury, 3,3'-dichloro-4,4'-diaminodiphenylmethane (MOCA) and toluene diisocyanate monomer (TDI) were under the limits of detection. In contrast, polycyclic aromatic hydrocarbons (PAHs), phthalates, Short chain chlorinated paraffins (SCCPs) soluble lead, cadmium and chromium were found in 86%, 88%, 46%, 81%, 43% and 83% of the specimens, respectively. The levels, toxicology and distribution of these known chemicals were evaluated. Then, a static-headspace gas chromatography-mass spectrometer (GC-MS) method in full scan mode was employed to screen for unknown volatile chemicals. Three groups of chemicals reflecting different kinds of pollution sources were discovered: new solvents, such as N, N-Dimethylformamide, new additives, such as 2-ethylhexanoic acid, and by-products, such as carbon disulfide. In summary, the existence of potential risk factors in school plastic tracks was revealed through exhaustive testing. Moreover, most of the hazardous components detected have been recently included in a new national standard to improve the safety performance of synthetic running tracks.

Toxicological and ecotoxicological properties of gas-to-liquid (GTL) products. 2. Ecotoxicology.

Gas-to-liquid (GTL) products are synthetic hydrocarbons produced from natural gas using a catalytic process known as the Fischer-Tropsch process. This process yields a synthetic crude oil that consists of saturated hydrocarbons which can subsequently be refined to a range of products analogous to those obtained from petroleum refining. However, in contrast to their petroleum-derived analogs, GTL products are essentially free of unsaturated or aromatic compounds and do not contain any sulfur-, oxygen-, or nitrogen-containing compounds. Under new chemical substance notification requirements, an extensive testing program covering the entire portfolio of GTL products has been undertaken to assess their hazardous properties to human health and environment. The results of these studies have been summarized in a two-part review. Part 1 provides an overview of the mammalian toxicity hazardous properties of the various GTL products. This second part of the review focuses on the aquatic, sediment, terrestrial, and avian toxicity studies which assess the ecotoxicological hazard profile of the GTL products. Many challenges were encountered during these tests relating to dosing, analysis and interpretation of results. These are discussed with the intent to share experiences to help inform and shape future regulatory mandates for testing of poorly soluble complex substances. As was the case with the mammalian toxicology review, there were a few cases where adverse effects were found, but overall the GTL products were found to exert minimal adverse ecotoxicological effects and these were less severe than effects observed with their conventional, petroleum-derived analogs.

Synthesis, liquid chromatographic fractionation and partial characterization of polybrominated dibenzofuran congeners.

Polybrominated dibenzofurans (PBDFs) are a class of highly toxic environmental contaminants which comprises 135 structurally different congeners. While the gas chromatographic separation and analysis of the most polychlorinated dibenzofurans (PCDFs) are well-documented, comparably little data is currently available in the case of PBDFs. In this study dibenzofuran was brominated to give a mixture of ∼40 PBDFs with one to seven bromine atoms. This synthesis mixture was fractionated by both countercurrent chromatography (CCC) with the solvent system n-hexane/toluene/acetonitrile and non-aqueous reversed-phase high performance liquid chromatography (RP-HPLC) with acetonitrile as the mobile phase. All together 80 consecutive CCC fractions and 40 HPLC fractions were taken and analyzed for PBDFs by gas chromatography coupled to mass spectrometry (GC/MS). CCC and RP-HPLC offered orthogonal separation of the PBDF mixture. As a consequence, selected CCC fractions were further fractionated by RP-HPLC. In this way, eight PBDFs could be isolated and the structures of twelve PBDFs were elucidated by proton magnetic resonance spectroscopy ((1)H NMR).

Synthesis of Isotopically Labeled (13)C3-Simazine and Development of a Simultaneous UPLC-MS/MS Method for the Analysis of Simazine in Soil.

The isotope dilution mass spectrometry (IDMS) is a highly efficient method for tackling the ion suppression in complex matrix by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), but a lack of commercial internal standards is a limiting factor for these analyses. Herein, an economical and efficient strategy for the synthesis of (13)C3-simazine via a three-step procedure was developed. The isotope-labeled internal standard was used for determination of simazine residue in soil samples. The quantitation method has a limit of detection of 0.015 µg/kg and quantitation of 0.08 µg/kg. The inter-day and intra-day precision of the method were below 4.6%. Recovery values were ranged between 92.9% and 99.2%. All the samples obtained from six provinces in China contained from 1 to 62 µg/kg of simazine.

Synthetic Origin of Tramadol in the Environment.

The presence of tramadol in roots of Sarcocephalus latifolius trees in Northern Cameroon was recently attributed to point contamination with the synthetic compound. The synthetic origin of tramadol in the environment has now been unambiguously confirmed. Tramadol samples isolated from tramadol pills bought at a street market in downtown Maroua and highly contaminated soil at Houdouvou were analyzed by high-precision (14)C measurements by accelerator mass spectrometry ((14)C AMS): Tramadol from the pills did not contain any radiocarbon, thus indicating that it had been synthesized from (14)C-free petroleum-derived precursors. Crucially, tramadol isolated from the soil was also radiocarbon-free. As all biosynthetic plant compounds must contain radiocarbon levels close to that of the contemporary environment, these results thus confirm that tramadol isolated from the soil cannot be plant-derived. Analyses of S. latifolius seeds, in vitro grown plants, plants from different origins, and stable-isotope labeling experiments further confirmed that synthetic tramadol contaminates the environment.

Environmental fates of synthetic musks in animal and plant: An in vivo study.

As emerging contaminants, synthetic musks (SMs) cause worldwide concern due to their bioaccumulation in biota. However, the environmental fates of SMs in biota are poorly understood. Here, for the first time, the uptake and elimination behaviors, as well as the transferable capacities, of SMs in living edible biota (fish and aloe) were revealed. Fish muscle was approximately 100-2000 times more efficient in accumulating SMs than was aloe leaf, and nitro musks showed a higher bioaccumulation potential than did polycyclic musks in biota. In addition, the transferable capabilities of SMs by root uptake in aloe were poor. This investigation also showed that both nitro musks and polycyclic musks that accumulated in biota exhibited excellent elimination rates in clean water, and the elimination rates were greater than 78% and 80% in fish (3 d) and aloe (2 d), respectively. Furthermore, the calculated results suggest that SMs might act as chemosensitizers and enhance the accumulation of normally excluded toxicants in biota in a real aquatic environment.

Synthesis of coplanar PCT as reference substances for the residue analysis of polychlorinated terphenyls.

In the course of the development of a new and reliable analytical method for the PCT, a group of environmental contaminants, six coplanar terphenyl congeners were synthesized and characterized by means of spectroscopic methods. These congeners are 3,3″,4,4″,5-pentachloro-p-terphenyl, 3,3″,4,5,5″-pentachloro-p-terphenyl, 3,3″,4,5″-tetrachloro-m-terphenyl, 3,3″,4,4″,5-pentachloro-m-terphenyl, 3,3″,5,5',5″-pentachloro-m-terphenyl, and 3,3″,4,4″,5,5″-hexachloro-m-terphenyl. A combination of silica gel column chromatography and preparative NP-HPLC was successfully applied for the first time for the isolation of especially the asymmetrically chlorinated target compounds from product mixtures of the syntheses. For the 29 coplanar, tetra- to heptachlorinated meta- and para-indicator congeners which are envisaged to be used within the analytical method, a simplified systematic nomenclature is suggested. Furthermore, calculation results for all torsion angles of the preferred conformations of the substances are given. The practical relevance of the calculated conformation optima is exemplarily demonstrated by the chromatographic behavior of the PCT compounds.

Release of engineered nanomaterials from polymer nanocomposites: the effect of matrix degradation.

Polymer nanocomposites-polymer-based materials that incorporate filler elements possessing at least one dimension in the nanometer range-are increasingly being developed for commercial applications ranging from building infrastructure to food packaging to biomedical devices and implants. Despite a wide range of intended applications, it is also important to understand the potential for exposure to these nanofillers, which could be released during routine use or abuse of these materials so that it can be determined whether they pose a risk to human health or the environment. This article is the second of a pair that review what is known about the release of engineered nanomaterials (ENMs) from polymer nanocomposites. Two roughly separate ENM release paradigms are considered in this series: the release of ENMs via passive diffusion, desorption, and dissolution into external liquid media and the release of ENMs assisted by matrix degradation. The present article is focused primarily on the second paradigm and includes a thorough, critical review of the associated body of peer-reviewed literature on ENM release by matrix degradation mechanisms, including photodegradation, thermal decomposition, mechanical wear, and hydrolysis. These release mechanisms may be especially relevant to nanocomposites that are likely to be subjected to weathering, including construction and infrastructural materials, sporting equipment, and materials that might potentially end up in landfills. This review pays particular attention to studies that shed light on specific release mechanisms and synergistic mechanistic relationships. The review concludes with a short section on knowledge gaps and future research needs.

Release of engineered nanomaterials from polymer nanocomposites: diffusion, dissolution, and desorption.

Polymer nanocomposites-polymer-based materials that incorporate filler elements possessing at least one dimension in the nanometer range-are increasingly being developed for commercial applications ranging from building infrastructure to food packaging to biomedical devices and implants. Despite a wide range of intended applications, it is also important to understand the potential for exposure to these nanofillers, which could be released during routine use or abuse of these materials, so it can be determined whether they pose a risk to human health or the environment. This article is the first in a series of two that review the state of the science regarding the release of engineered nanomaterials (ENMs) from polymer nanocomposites. Two ENM release paradigms are considered in this series: the release of ENMs via passive diffusion, desorption, and dissolution into external liquid media and release of ENMs assisted by matrix degradation. The present article focuses primarily on the first paradigm and includes (1) an overview of basic interactions between polymers and liquid environments and a brief summary of diffusion physics as they apply to polymeric materials; (2) a summary of both experimental and theoretical methods to assess contaminant release (including ENMs) from polymers by diffusion, dissolution, and desorption; and (3) a thorough, critical review of the associated body of peer-reviewed literature on ENM release by these mechanisms. A short outlook section on knowledge gaps and future research needs is also provided.

Formation of polybrominated dibenzofurans from polybrominated biphenyls.

Decades after phasing out their production and use, especially in the formulations of brominated flame retardants (BFRs), polybrominated biphenyls (PBBs) still pose serious environmental and health problems. The oxidation of PBB has been hypothesised as a pathway for the formation of the notorious polybrominated dibenzofurans (PBDFs) and their dispersion in the environment. However, the exact reaction corridor remains misunderstood, with the existing mechanisms predicting the reaction to proceed via a high energy process that involves the breakage of C-C linkage (∼118.0 kcal mol(-1)) and the subsequent formation of bromophenols molecules, where the latter are supposed to act as precursors for the formation of PBDFs (∼40.0-60.0 kcal mol(-1)). Herein, we show that PBBs produce PBDFs in a facile mechanism through a series of highly exothermic reactions (i.e., overall barriers reside 8.2-10.0 kcal mol(-1) below the entrance channel). Whilst the fate of the ROO-type intermediates in oxidation of all aromatics is to emit CO or CO2, PBDFs constitute the dominant products from the oxidation of PBBs. Initially formed R-OO adduct evolves in a very exoergic mechanism to yield PBDFs. In view of the facile oxidative transformation of PBBs into PBDFs, we conclude that, it is unsafe to dispose BFRs in oxidation processes, as this practice generates high yields of toxic PBDFs.

The micro-scale synthesis of (117)Sn-enriched tributyltin chloride and its characterization by GC-ICP-MS and NMR techniques.

Organotin compounds (OTCs) are among the most toxic substances ever introduced to the environment by man. They are common pollutants in marine ecosystems, but are also present in the terrestrial environment, accumulated mainly in sewage sludge and landfill leachates. In investigations of the degradation and methylation processes of OTC in environmental samples, the use of enriched isotopic tracers represents a powerful analytical tool. Sn-enriched OTC are also necessary in application of the isotope dilution mass spectrometry technique for their accurate quantification. Since Sn-enriched monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) are not commercially available as single species, "in house" synthesis of individual butyltin-enriched species is necessary. In the present work, the preparation of the most toxic butyltin, namely TBT, was performed via a simple synthetic path, starting with bromination of metallic Sn, followed by butylation with butyl lithium. The tetrabutyltin (TeBT) formed was transformed to tributyltin chloride (TBTCl) using concentrated hydrochloric acid (HCl). The purity of the synthesized TBT was verified by speciation analysis using the techniques of gas chromatography coupled to inductively coupled plasma mass spectrometry (GC-ICP-MS) and nuclear magnetic resonance (NMR). The results showed that TBT had a purity of more than 97%. The remaining 3% corresponded to DBT. TBT was quantified by reverse isotope dilution GC-ICP-MS. The synthesis yield was around 60%. The advantage of this procedure over those previously reported lies in its possibility to be applied on a micro-scale (starting with 10mg of metallic Sn). This feature is of crucial importance, since enriched metallic Sn is extremely expensive. The procedure is simple and repeatable, and was successfully applied for the preparation of (117)Sn-enriched TBTCl from (117)Sn-enriched metal.

Synthesis of Br(7)-Br(9) hydroxylated/methoxylated polybrominated diphenyl ethers (OH/MeO-PBDEs) and analyses on mass spectra and GC data of the MeO-PBDEs.

Previous studies have indicated that highly brominated diphenyl ethers may be oxidatively metabolized to OH-PBDEs and accumulated in human serum. However, identification of such metabolites has been hampered by a lack of reference standards. In the present study, we have developed a systematic approach for the preparation of Br7-Br9 OH-PBDEs with various substitution patterns. The approach involved a coupling reaction between 5-fluoro-2-nitroaniline and a methoxyphenol or aminomethoxyphenol to produce diphenyl ethers, subsequent bromination of these diphenyl ethers, removal of the amino/nitro groups, and/or conversion of amino/nitro groups to bromo substituents. The amino group was the key to our approach; it facilitated regioselective bromination on the phenyl rings and could then be removed or readily replaced by a bromo substituent. In total, 25 MeO-PBDEs and 20 OH-PBDEs were successfully synthesized, demonstrating the feasibility and versatility of this approach. The characteristics of the mass spectrometric fragmentations of the MeO-PBDEs have been investigated and are discussed herein. In addition, the relative retention times of these MeO-PBDEs relative to BDE-118 on three columns with different polarities have been determined.

Synthesis and tentative identification of novel polybrominated diphenyl ether metabolites in human blood.

Hydroxylated polybrominated diphenyl ethers (OH-PDBEs) are exogenous, bioactive compounds that originate, to a large extent, from anthropogenic activities, although they are also naturally produced in the environment. In the present study nine new authentic OH-PBDE reference standards and their corresponding methyl ether derivatives (MeO-PBDEs) were synthesised and characterised by NMR spectroscopy and mass spectrometry. Seven of the authentic reference standards prepared were thereafter tentatively identified in a pooled human blood sample. The tentatively identified OH-PBDEs were 3-hydroxy-2,2',4,4',6-pentabromodiphenyl ether, 3'-hydroxy-2,2',4,4',6-pentabromodiphenyl ether, 3-hydroxy-2,2',4,4',5-pentabromodiphenyl ether, 3-hydroxy-2,2',4,4',5,6'-hexabromodiphenyl ether, 3'-hydroxy-2,2',4,4',5,6'-hexabromodiphenyl ether, 3-hydroxy-2,2',4,4',5,5'-hexabromodiphenyl ether and 4-hydroxy-2,2',3,4',5,5',6-heptabromodiphenyl ether. An additional seven OH-PBDEs were tentatively identified in the pooled human blood sample, of which one OH-PBDE, 4'-hydroxy-2,2',4,5,5'-pentabromodiphenyl ether, has not been identified in human blood before. The identification was performed using gas chromatography-mass spectrometry (GC-MS) recording the bromine ions m/z 79, 81. The tentative identification was supported by the peaks relative retention times (RRTs) compared to authentic references on two GC columns of different polarities for the hexa-, and heptabrominated OH-PBDEs, and three different GC columns for the pentabrominated OH-PBDEs. The OH-PBDE congeners most likely originate from human metabolism of a flame retardant, i.e. polybrominated diphenyl ethers (PBDEs), due to the relatively high concentrations of PBDEs in the same human blood sample and the fact that these PBDEs could form the tentatively identified OH-PBDEs via metabolic direct hydroxylation or via 1,2-shift.

Assessing the structure-activity relationships of fluorotelomer unsaturated acids and aldehydes with glutathione. Reactivity of glutathione with fluorotelomer unsaturated acids and aldehydes.

Fluorotelomer alcohols (FTOHs) have been shown to degrade via abiotic and biotic mechanisms to perfluorocarboxylates (PFCAs) which are environmentally persistent and bioaccumulate in humans and wildlife depending on their chain length. Fluorotelomer unsaturated aldehydes (FTUALs) and acids (FTUCAs) are intermediate metabolites that form from the degradation of FTOHs. Their potential for toxicity is not yet defined and may be more significant compared to PFCAs. Past studies have shown that these intermediates form adducts with glutathione (GSH). The purpose of this study was to further assess the reactivity of these intermediate compounds. In vitro experiments were carried out in an aqueous buffer system (pH 7.4) where FTUCAs and FTUALs of varying chain lengths were reacted with GSH. To quantify the reactivity of FTUCAs and FTUALs, unreacted free GSH was derivatized with 5,5'-dithiobis(2-nitrobenzoic acid), its absorbance measured at 412 nm, and the percentage of unconjugated free GSH evaluated over time. EC50 values were obtained for the reactions of GSH with acrolein and methyl methacrylate to assess the accuracy of the method, as well as for acrylic acid, FTUCAs, and FTUALs. The results of this study indicated that α,ß-unsaturated aldehydes are comparatively the most reactive and reaction with GSH may be influenced by the length of the fluorinated tail. This is the first study to examine the relationship of FTUCAs and FTUALs with biological nucleophiles by quantifying their intrinsic reactivity.

Environmentally persistent free radicals (EPFRs). 1. Generation of reactive oxygen species in aqueous solutions.

Reactive oxygen species (ROS) generated by environmentally persistent free radicals (EPFRs) of 2-monochlorophenol, associated with CuO/silica particles, were detected using the chemical spin trap, 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), in conjunction with electron paramagnetic resonance (EPR) spectroscopy. Yields of hydroxyl radical ((•)OH), superoxide anion radical (O(2)(•-)), and hydrogen peroxide (H(2)O(2)) generated by EPFR-particle systems were reported. Failure to trap superoxide radicals in aqueous solvent, formed from reaction of EPFRs with molecular oxygen, results from fast transformation of the superoxide to hydrogen peroxide. However, formation of superoxide as an intermediate product in hydroxyl radical formation in aprotic solutions of dimethyl sulfoxide (DMSO) and acetonitrile (AcN) was observed. Experiments with superoxide dismutase (SOD) and catalase (CAT) confirmed formation of superoxide and hydrogen peroxide, respectively, in the presence of EPFRs. The large number of hydroxyl radicals formed per EPFR and monotonic increase of the DMPO-OH spin adduct concentration with incubation time suggest a catalytic cycle of ROS formation.

Formation of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) from a refinery process for zinc oxide used in feed additives: a source of dioxin contamination in Chilean pork.

The Republic of Korea found dioxin at concentrations exceeding the Korean maximum residue limit (MRL) in pork (2 pg TEQ g(-1) fat) imported from Chile in June 2008. Korea and Chile collaborated and investigated to find out the sources of contamination. An isotope dilution method and high resolution gas chromatography/mass spectrometry (HR-GC/MS) were used for the analysis of PCDD/Fs. PCDD/Fs were found from 2.17 to 36.7 pg TEQ g(-1) fat from Chilean pork. 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, 1,2,3,6,7,8-HxCDF, and 2,3,4,6,7,8-HxCDF were found as the major congeners in pork samples. 2,3,4,7,8-PeCDF showed the highest concentration and contributed about 30% among the congeners in most of the samples. 2,3,7,8-TCDD, 1,2,3,7,8,9-HxCDD, OCDD, 2,3,7,8-TCDF, 1,2,3,7,8-PeCDF, 1,2,3,7,8,9-HxCDF, and OCDF were not detected or exist at background levels in the less contaminated samples. Remarkably high concentrations of PCDD/Fs were found in samples of zinc oxide (17147 pg TEQ g(-1)), zinc oxide based premix (6673 pg TEQ g(-1)), and the residue crust (800 pg TEQ g(-1)) in a mixing chamber in the feed mill. From the results of various investigations, this case concluded that zinc oxide in the feed was the major source of the dioxin contamination in pork. The dioxins were formed from a metal refinery process to collect zinc oxide.